Table of Contents
Advertisement
Input selection and AV connections
Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 6
for a clear view of the back connection recommendations.
Most VCRs and decoders send a signal through the
SCART lead to switch the television to the correct Input
socket. Alternatively press the external source selection
button
until the picture from connected equipment is
B
shown. This button must be used to view equipment
connected using the COMPONENT VIDEO INPUT (EXT1
and EXT2).
An S in the display e.g.
B
input is set for an S-Video signal.
Input selection
Use the Input Selection if the television does not switch
over automatically.
Press
to select
B
1
6 (EXT1-6) or PC.
B
PC displays a computer connected to Input
RGB/PC on the back of the television.
To return to television mode press
2
one of the numbered buttons.
INPUT signal selection
This specifies the type of signal going into SCART 3 (EXT3)
on the back of the television. Please refer to the
manufacturers instructions for the connected equipment.
In the SET UP menu press Q until
1
AV connection is highlighted, then press OK.
With S or R select either AV or S-VIDEO as the
required input for EXT3.
If the colour is missing try the alternative setting.
AV connection
EXT3 input
EXT3 output
Woofer
Audio output
MENU
Back
EXIT
Watch TV
3S (EXT 3S), indicates the
B
1,
B
2,
B
3,
B
4,
B
again or
B
AV
EXT4
Ext.
Fixed
OUTPUT signal selection for SCART 3
This enables selection of the source to output from
SCART 3. For example, to record transmissions in stereo
from a stereo decoder – connect a stereo decoder to
SCART 4 or 5 and stereo VCR to SCART 3, then select
EXT4 or EXT5 as the EXT3 output. The signal received
through SCART 4 or 5 will output directly through
SCART 3.
1
EXT3 input
EXT3 output
Woofer
5,
Audio output
MENU
2
18
Select AV connection.
AV connection
Back
EXIT
Watch TV
Use S or R to change the EXT3 output option to:
Monitor = The picture on screen.
TV = The last television programme selection.
EXT1 = The picture from equipment connected
to
1.
B
EXT2 = The picture from equipment connected
to
2.
B
EXT4 = The picture from equipment connected to
SCART 4.
EXT5 = The picture from equipment connected to
SCART 5.
EXT6 = The picture from equipment connected to
the side input sockets.
AV
EXT4
Ext.
Fixed
Advertisement
Table of Contents
