Toshiba Stasia 26WL46 Series Owner's Manual page 10

The television can be tuned-in manually using Manual tuning. For example: if the television cannot be
connected to a VCR/decoder with a SCART lead or to tune-in a station on another System (see page 9).
Use S and R to move across the screen and select any of these Manual Tune options.
Programme
Programme: The number to be pressed on the remote control.
System: Specific to certain areas. See page 9.
Colour system: Factory set to Auto, should only be changed if problems are experienced, i.e. NTSC input from
external source.
Programme skip: * means nothing has been stored or the facility to skip the channel is ON. See page 11.
Channel: The channel number on which a station is being broadcast.
Search: Search up and down for a signal.
Manual fine tuning: Only used if interference/weak signal is experienced. See page 21.
Station: Station identification. Use the P or Q and S or R buttons to enter up to seven characters.
To allocate a programme position on the television for a decoder and VCR: turn the decoder on,
Press MENU and using S or R select the SET UP
1
menu, with Q highlight Manual tuning, press
OK to select.
SET UP
Language
Country
Auto tuning
Manual tuning
Programme sorting
MENU Back EXIT Watch TV
Use P or Q to highlight the programme
2
position required e.g. we suggest Prog. 0 for
a VCR.
Manual tuning
Prog. Sys. Channel
0 I
1 I
2 I
3 I
4 I
5 I
Select
MENU Back
Manual tune
Programme
System Colour
system
insert a pre-recorded tape in the VCR and press PLAY, then manually tune.
English
UK
OK
OK
OK
Station
60 VCR
22 BBC1
25 ITV
28 BBC2
32 CH4
69
EXIT Watch TV
Channel Search
skip
3
0
Store
4
5
6
0
Store
Each signal will show on the television, if it is not
7
your VCR, press P or Q again to restart the
search.
10
Manual fine Station
tuning
Press OK to select. If the programme is skipped,
Programme skip must be removed before
storing.
Manual tuning
System
I A 60
MENU Back EXIT Watch TV
Press R to select System and use P or Q to
change (if required, see page 9).
Then press R to select Search.
Press P or Q to begin the search.
Search will appear and the television will show
the channel numbers.
Manual tuning
Search
I A 60
MENU Back EXIT Watch TV
Continues on the next page
0 V C R
0