Table of Contents
Advertisement
Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
Computer
Connect the PC cable from the computer to the
RGB/PC terminal on the back of the television.
Press the
B
to select PC mode.
The following signals can be displayed:
VGA: 640 x 480/60 Hz (VESA 480-60)
SVGA: 800 x 600/60 Hz (VESA 600-60)
XGA: 1024 x 768/60 Hz (VESA 768-60)
PLEASE NOTE:
Some PC models cannot be connected to this
television.
An adaptor is not needed for computers with a DOS/V
compatible mini D-sub 15p terminal.
A band may appear at the edges of the screen or parts
of the picture may be obscured. This is due to the
strength of the signal, it is not a malfunction.
When PC mode is selected some of the television's
features will be unavailable, these will be greyed out on
the menu lists and not selectable, when not in PC mode
PC Setting will be greyed out.
Connecting a computer
the back of your television
Conversion adaptor if
required (not supplied)
Audio cable for PC to
television connection
(not supplied)
Signal information for Mini D-sub 15p connector
Pin assignment
for RGB/PC
terminal
Pin. No.
Signal name
1
2
3
4
NC (not connected)
5
6
Ground
7
Ground
8
Ground
7
Mini D-sub
15p connector
RGB PC cable
(not supplied)
Pin No.
Signal name
R
9
G
10
B
11
12
NC
13
14
15
NC
Ground
NC
NC
H-sync
V-sync
NC
Advertisement
Table of Contents
