Memory
This group displays the system's total memory.
Password
This option allows you to set or reset the user password for power on and
instant security.
Registered
Not Registered
If the supervisor password has been registered, it must be entered to
access this and other TSETUP functions as well as Hardware Setup.
For details on setting the password, refer to the Password security section
later in this chapter.
Battery
These options let you set battery save functions for optimum performance
or battery power conservation.
Battery Save Mode
This option is used to select Full Power, Low Power or User
Setting of the BATTERY SAVE OPTIONS.
These settings are for the MS-DOS environment only. When you use
Windows, settings made in Power Saver will be used.
7-4 Setup and Password Security
First page of TSETUP
The user password has been registered.
The user password has not been registered.
User's Manual