Toshiba SD-16VBSB User Manual page 30

SD-16VBSB/TSB-eng1 3/10/05
6 Press the √ button to select Stop (recording stop
time).
PR Day
01 SA 01 13 : 25 19 : 57
• Press the œ or √ button to select the hour or
minute.
• Press the ... or † button to set the stop time.
7 Press the √ button to select Speed (recording
speed).
PR Day
1 SA 1 13 : 25 19 : 57
• Press the ... or † button to select the required
recording speed.
• Auto SP (Standard Play)
• Auto Tape Speed Select
The DVD-VCR's "Auto Tape Speed Select"
function compares the duration of the timer
recording to the actual recording time remaining
on the tape loaded. If there is insufficient tape
to complete a timer recording in Auto mode,
the DVD-VCR automatically switches to LP
mode to record the whole programme.
8 Press the √ button to select V/P (recording
VPS/PDC).
PR Day
01 SA 01 13 : 25 19 : 57
• Press the ... or † button to select On or Off.
30 - English
10:13 AM Page 30
Start Stop Speed V/P
: :
: :
: :
: :
: :
: :
OK
RETURN MENU
Start Stop Speed V/P
SP
: :
: :
: :
: :
: :
: :
OK
RETURN MENU
LP (Long Play)
Start Stop Speed V/P
SP Off
: :
: :
: :
: :
: :
: :
OK
RETURN MENU
• VPS (Video Programme System) /
PDC (Programme Delivery Control System)
Depending on TV stations, VPS/PDC signals are
transmitted with TV programmes. The VCR can
control the timer recording start and end times by
the VPS/PDC signals to assure the recording of a
whole programme, covering any changes in the
published broadcast time, that is, time shift,
extension or interruption of the programme. lf the
TV programme is interrupted, during the VPS/PDC
controlled timer recording,the recording will be
automatically interrupted and resumed when the
programme continues.
Important: The VPS/PDC function only works when
the VPS/PDC signal is transmitted with the TV
programme to be recorded. If the broadcasting
station does not transmit the VPS/PDC signal, the
timer recording will be done in the normal mode
even if it was programmed in the VPS/PDC mode.
9
When you have finished, press the OK button to
set the Timer Programming.
10
Press the MENU button to exit the menu.
11
Press the ON/STANDBY button to activate the
timer.
Before starting recording, the DVD-VCR compares
the timer duration with the remaining time on the
cassette.
• Press the ON/STANDBY button to stop Timer
programming recording.
• Timer Recording will not work when the power is
on.
• When power is switched on, programs registered
for recording in Timer Recording will be
automatically cleared after the start time and date
have passed.