Nicam; Intelligent Picture Control - Toshiba SD-16VBSB User Manual

SD-16VBSB/TSB-eng1 3/10/05

NICAM

NICAM programmes are divided into 3 types. NICAM
Stereo, NICAM Mono and Bilingual (transmission in
another language).
NICAM programmes are always accompanied by a
standard mono sound broadcast and you can select the
desired sound. Please refer to page 33.
1 Press the MENU button, then press the OK or √
button.
SETUP
DVD
VCR
PROG
FUNC
2 Press the ... or † button to select User Set, then
Press the OK or √ button.
The User Set menu is displayed.
SETUP
DVD
VCR
PROG
FUNC
3 Press the ... or † button to select NICAM, then
press the OK or √ button to select On or Off.
• On (for NICAM mode):
Normally set at this position
• Off (for MONO mode):
Only set at this position to record the standard
mono sound during a NICAM broadcast if the
stereo sound is distorted due to inferior
reception conditions.
10:13 AM Page 23
Setup
√ √
Language : English
√ √
Clock
√ √
Install
√ √
User Set
√ √
Auto Power Off : Off
√ √
Screen Messages : On
OK RETURN MENU
User Set
√ √
Colour System : Auto
√ √

NICAM

: On
√ √
IPC : On
OK MENU
RETURN
Intelligent Picture
Control
This feature allows you to adjust the sharpness of the
image automatically, according to your own preferences.
1 During playback press the MENU button, then
press the OK or √ button.
2 Press the ... or † button to select User Set, then
press the OK or √ button.
The User Set menu is displayed.
3 Press the ... or † button to select IPC (Intelligent
Picture Control), then press the OK or √ button to
select IPC option.
Colour System
SETUP
NICAM
DVD
IPC
VCR
PROG
FUNC
OK
• You can select the modes simply by pressing
the IPC button.
4
To adjust the sharpness manually, press the
† button to turn the IPC mode OFF.
The sharpness of the picture is adjusted
manually.
Press the œ or √ buttons until the picture is
displayed according to your preferences.
PICTURE
IPC : OFF
SOFTEN
œ œ √ √
User Set
√ √
: Auto
√ √
: On
√ √
: On
RETURN MENU
SHARPEN
ON/OFF † †
English - 23