TV output signal
Problem
Display on TV is poor
No display
If you turn the computer off in Standby mode while the display is on TV,
the computer will select either the internal LCD or an external computer
CRT as the display device.
Standby/Hibernation
Problem
The system will not
enter Standby/
Hibernation
Satellite 2430 Series
Procedure
Make sure the TV type is correct for your area:
NTSC (US) or PAL (Europe).
Try adjusting the contrast and brightness
controls on the external monitor.
Press hotkeys Fn + F5 to change the display.
Refer to Chapter 5, The Keyboard.
If problems persist, contact your dealer.
Procedure
Is Windows Media™ Player open? The system
might not enter Standby/Hibernation, if Windows
Media Player is either playing a selection or
finished playing a selection. Close Windows
Media Player before you select
Standby/Hibernation.
If problems persist, contact your dealer.
Troubleshooting
8-17