Table of Contents
Advertisement
J SFE Mode
Symphony
Hall in Boston (Hall 1) _ Philharmonic
Hall in Bratislava (Hall 2) _ Jazz Club in Seoul B
Church in Seoul _ Amphitheater
(Rock) _ Off
Symphony
Hall in Boston (Hall 1) : Provides a
clear vocal as if listening in a concert hall.
Philharmonic
Hall in Bratislava (Hall 2) : Also
provides a clear vocal as if listening in a concert hall
but, less powerful than HALL1.
Jazz Club in Seoul B : Recommended setting for
Jazz.
Church in Seoul : Gives the feel of being in a grand
church.
Amphitheater
(Rock) : Recolnlnended setting for
Rock.
Off : Sebct for normal listening.
You can enjoy more natural and vivid surround sound
with enriched tones by adjusting the depth of sound
using the level options.
Off _ High _ Low
IN©TES
1
_, 3D Sound is not availabb in FM mode.
Use TV SOUND:
1) When you want to listen to the TV's audio
through the home theater speakers.
2) When you want to listen to the audio from a USB
device plugged into the TV through the home
theater speakers.
J TV SOUND ON/OFF support specification
Anynet+
ON
O
O
(HDMPCEC)
supported TV
OFF
O
X
Anynet+
(HDMI-CEC) not
No operation
supported TV
If you have a TV that supports Anynet+ (HDMPCEC),
the rv SOUND button lets you direct the TV's audio
to the Home Theater Speakers or the TV Speakers. To
use, follow these steps:
1.
Connect an HDMI cable to the TV and home
theater. (See page 17.)
2.
Set Anynet+ (HDMI-CEC) On in the home
theater and T_
3.
Press the TV SOUND button on the remote
control. rv SOUND ON flashes on the display
on the front panel, and then changes to D. IN.
When TV SOUND is on, TV audio outputs
through the Home Theater speakers.
4.
Press the TV SOUND button again to turn TV
SOUND off.
When TV SOUND is off, TV audio outputs
through the speakers of the connected
Anynet+ T_
40
English
Advertisement
Table of Contents
