Table of Contents
Advertisement
The H ome
Theater
has an effective
reception
range
of
up to32.8 feet inall directions
ifthere are n o obstacles.
The c onnection
will be automatically
cut off i fthe
device
is out of t his r ange.
Even within
this r ange,
the
sound
quality
may be degraded
by obstacles
such as
walls or doors.
This wireless
device
may cause
electrical
interference.
during
its operation.
To connect the Home Theater to a
Bluetooth device
Bluetooth
device
Check if the Bluetooth device supports the Bluetooth
compliant stereo headset function.
1.
Press the FUNCTION button on the remote control
of the product to display the BT message.
2.
Select the Bluetoeth menu on the %uetooth device
you want to connect. For instructions, refer to the
Bluetoeth device's manual.
3.
Select the Stereo headset menu on the Bluetoeth
device.
You will see a list of devices
4.
Select "[HTS]Fxxxxx"
from the searched list.
When the Home Theater is connected to the
Bluetooth device, the device name of the
connected Bluetooth device, followed by the
name of home theater will appear on the front
display of home theater.
5.
Play music on the connected device.
You can listen to the music playing on the
connected Bluetoeth device over the Home
Theater system.
I NOTES I
_, The Home Theater only supports Middle Quality SBC
data (up to 237kbps@48kHz), and does not support
High Quality SBC data (328kbps@44.1 kHz).
_, The AVRCP feature is supported. It's functionality
will differ, depending on the specifications of the
connected device.
Connect only to a Bluetooth device that supports the
A2DP Profile.
Only one Bluetooth device can be paired at a thne.
The search or connection functions may not work
properly in the following cases:
- If there a strong electric field near or around the
home theater.
- If several Bluetooth devices are simultaneously
paired with product.
- If the %uetooth device is turned off, not in place, or
malfunctions.
- Note that such devices as microwave ovens, wireless
LAN adapters, fluorescent lights, and gas stoves use
the same frequency range as the Bluetoeth device,
and can cause electric interference.
To disconnect the Bluetooth device from
the Home Theater
You can disconnect the Bluetooth device from the Home
Theater. For instructions, refer to the Bluetooth device's
manual
When the Home Theater is disconnected from the
Bluetooth device, the Home Theater will display
DISCONNECTED on the front display.
To disconnect the Home Theater from the
Bluetooth device
Press the ( #_i ) button on the front panel of the Home
Theater to switch from BT to another mode or turn off the
Home Theater.
Except when you disconnect the home theater by
changing functions, the connected Bluetoeth device
will wait a certain thne for a response from the
Home Theater before terminating the connection.
(Disconnection time may differ, depending on the
Bluetoeth device.)
I NOTES I
In Bluetooth connection mode, the Bluetooth
connection will be lost if the distance between the
Home Theater System and the Bluetooth device
exceeds 32.8 feet. When the Bluetooth device comes
back into effective range or you restart the Bluetooth
device, you have to pair the device and home theater
again to reconnect.
In Bluetooth mode, the screen saver will start if
the Bluetooth device stays in the Ready state for 5
minutes. To reconnect the Bluetooth device, turn off
the screen saver, and then connect the device. To turn
off the Screen saver, press any button on the remote
control (the Volume button, a number button, etc.)
English
3?
Advertisement
Table of Contents
