Table of Contents
Advertisement
Connecting
to a TV
Connect an HDMI cable (not supplied) from tile HDMI OUT jack on the back of the product to the HDMI IN jack oil your
T_ If you have set the product's remote contrd to operate your TV, press tile "IV SOURCE button on tile remote control
and select HDMI as the external source of the T_
Connecting
to External Devices
To select tile correct mode for all external device, press the FUNCTION button. Eactl time you press the button, the
mode changes in this order : BD/DVD --* D. IN - AUX --* HDMI - FM - BT
AUX IN : Connecting
an External
Analog
Component
Using an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack on the
external analog component. => Select the AUX mode.
• Be sure to match the colors on the cable plugs to the colors on the input and output jacks.
OPTICAL
: Connecting
an External
Digital
Audio
Component
Use to connect tile digital audio output of digital signal components such as Cable Boxes and Satellite Receivers (Set-
Top-Boxes). Using a digital optical cable (not supplied), connect the Optical Digital Audio hi jack on the product to the
Digital Optical Out iack of the external digital device.
=> Select the D. IN mode.
HDMI
IN : Connecting
to an External
Component
with
an HDMI
Cable
Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack on your
digital device. =_ Select the HDMI mode.
I NOTES I
To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your T_
This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.
This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported
English
17
Advertisement
Table of Contents
