Table of Contents
Advertisement
Anynet+
(HDMI-CEC)
Anynet+
isaconvenient
function
that offers linked
operations
with
other Samsung
products
that have
the A nynet+
feature
and l ets you
control
those products
with o ne
Samsung
TV remote.
To operate
this function,
you m ust connect
this
product
to an Anynet+
Samsung
TV
using an HDMI
cable.
Ifyou w ant touse an Anynet+
(HDMFCEC)
function,
please
follow
the i nstructions
below.
1) Connect
the product
toan
Anynet+
(HDMFOEO)_compliant
Samsung
TV using HDMI
Cable.
2) Set the A nynet+
(HDMFCEC)
feature
to On in both the T V and
the p roduct.
3) Search
for a nd then select
the
product
in the T V's Anynet+
(HDMFCEC)
list. For more exact
instructions,
see t he A nynet+
section
of t he T V's user's
HTanual.
When activated, lets Samsung
Call Center agents diagnose and
Remote
fix problems witt7 the product
_aa,_agem_nt,,,
,,
,,,,_
remotely. Requires an active Intemet
connection. Remote Management
service might not be available in
some countries.
For more information about ttTe
Software
Software Update function, see
Update
"UpgradhTg Software" on page 27.
Lets you set the Use mode. If you
Use
Mode
are using the home theater at home,
always select Home. Store is for
retail display setthTgs only.
Contact
Provides contact information for
Samsung
assistance witt7 your product.
Reset
Reverts all setthTgs to ttTeir defaults
except for the network and Smart
Hub settings, and then starts the
Setup function. Requires that you
enter your security PIN. The default
security PIN is 0000
When you connect this product to a network, you can
use network based applications and functions such as
Smart Hub and BD-LIVE, and upgrade the product's
software through the network connection. For more
information about accessing and using Internet services,
see the Network Services chapter of this manual on
pages 41 ._49. Instructions for configuring the network
connection start below.
Configuring
Your Network Connection
If you didn't configure your network connection dudng the
initial settings procedure or you need to reset the network
connection, follow the directions below.
Before you begin, contact your Internet Service Provider
to find out if your IP address is static or dynamic. If it
is dynamic, and you have a wired or wireless network,
we recommend using the Automatic configuration
procedures described below.
If you are connecting to a wired network, connect the
product to your router using a LAN cable before you start
the configuration procedure.
To begin configuring your network connection, follow
these steps:
1.
In the Home screen, select Settings, and then
press the _
button.
2.
Select Network, and then press the rdl button.
3.
Select Network Settings, and then press the
button.
4.
Go to the instructions for Wired networks starting
below or the instructions for Wireless networks
starting on page 25.
Wired Network
J Wired-Automatic
After following Steps 1 to 3 above:
1.
In the Network Settings screen, change Network
type to Wired. Then, select Connect and press
the _
button. The product detects the wired
connection, verifies the network connection and
then connects to the network.
2.
When it is done, highlight OK, and then press
button.
24
English
Advertisement
Table of Contents
