Accessories; Exploring Your New 3D Glasses - Toshiba FPT-AGO1G Owner's Manual

3D-glasses_EN.book Page 4 Monday, August 2, 2010 11:09 AM
3D Glasses
case
For the storage
of the 3D
Glasses.

Exploring your new 3D Glasses

Lens (liquid-crystal
shutter)
A right and left liquid-
crystal shutter opens and
closes alternately with the
images for the left eye and
for the right eye
alternately projected on
the television screen. In
this way, 3D images are
reproduced.
Infrared
reception part
Receives the
infrared signal
for the liquid-
crystal shutter
control sent from
the television.

Accessories

Screwdriver Specialized
For replacing
band
the battery. For securing the
3D Glasses.
Power button and power light
Turns on or off the power of 3D
Glasses by keeping pressing the
power button for about 1 second.
– When the power is turned on,
the power light lights up for
about two seconds.
– When the power is turned off,
the power light blinks 3 times.
Insulation sheet
This is put for the consumption
prevention of the battery.
Pull this out before beginning use.
Battery cover
When replacing the battery, remove this.
4
Lens wipe
For wiping the
3D Glasses.
Power
button
Power
light