Accessories; Each Part's Name And Function - Toshiba FPT-AG01U Owner's Manual

Accessories

3D Glasses
case [1]*
For the storage
of the 3D
Glasses.
* [1]= the quantity.

Each part's name and function

Lens (liquid-crystal
shutter)
A right and left liquid-
crystal shutter opens and
closes alternately with the
images for the left eye and
for the right eye
alternately projected on
the television screen. In
this way, 3D images are
reproduced.
Infrared
reception part
Receives the
infrared signal
for the liquid-
crystal shutter
control sent from
the television.
Screwdriver
[1]*
For replacing
the battery.
Power button and power light
Turns on or off the power of 3D
Glasses by keeping pressing the
power button for about 1 second.
---When the power is turned on,
the power light lights up for
about 2 seconds.
---When the power is turned off,
the power light blinks 3 times.
Battery cover
When replacing the batteries, remove this.
Specialized
band [1]*
For securing the
3D Glasses.
Insulation sheet
This is put for the consumption
prevention of the battery.
Pull this out before beginning use.
Lense wipe [1]*
For wiping the
3D Glasses.
Power
button
Power
light