Precautions For Daily Use - Toshiba FPT-AGO1G Owner's Manual

3d glasses
Table of Contents

Advertisement

3D-glasses_EN.book Page 5 Thursday, July 29, 2010 4:29 PM

Precautions for daily use

Notes on handling the 3D Glasses' liquid crystal shutter lenses
• Do not put excessive force on the lenses.
• Do not scratch the surface of the lenses with sharp objects.
• Do not drop or bend the 3D Glasses.
• Do not block the IR sensor for 3D Glasses on the TV by placing objects in
front of it.
• Do not cover the IR sensor on the 3D Glasses with stickers or labels.
• Keep the IR sensor on the 3D Glasses clean.
• If the 3D Glasses interfere with any other IR communication device or 3D TV,
the 3D Glasses may not work correctly.
• If you use any device, such as a mobile phone or mobile wireless device,
near the 3D Glasses, the 3D Glasses may not work correctly.
• Use the product in the following temperature range; otherwise, the quality
of the 3D image or the reliability of the product cannot be guaranteed.
3D Glasses: 0ºC - 40ºC (32ºF - 104ºF)
TV: 0ºC - 35ºC (32ºF - 95ºF)
• If you use a fluorescent light, it may flicker depending on the frequency of
the light. In this case, reduce the brightness of the fluorescent light, or use
another light. (It is not recommended to watch the TV in a dark room,
especially for children.)
• Wear the 3D Glasses properly, otherwise you may not see the correct 3D
image.
• When not viewing 3D images, take off the 3D Glasses; otherwise, it may be
difficult to see the display on other products such as PC, digital clock or
calculator, etc.
Notes on IR communication
Notes on watching the TV
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents