Battery Pack; High Capacity 2Nd Battery Pack; Universal Ac Adaptor; Battery Charger - Toshiba Portege R100 User Manual

Battery Pack

You can increase the portability of the computer with Battery Packs
(PA3154U). If you're away from an AC power source, you can replace a
low battery with a fully charged one. See Chapter 6, Power and Power-Up
Modes.

High Capacity 2nd Battery Pack

A High Capacity 2nd Battery Pack (PA3155U) is seated in a base that fits
beneath the computer. It provides about twice the power and operating
time as the standard Battery Pack. Refer to the Replacing the Battery
Pack section in Chapter 6, The Power and Power-Up Modes.

Universal AC Adaptor

If you frequently transport the computer between different sites such as
your home and office, purchasing an AC adaptor for each location will
reduce the weight and bulk of your carrying load.

Battery Charger

The battery charger (PA3091U) was designed for an earlier computer
model. To charge batteries for the PORTÉGÉ R100, it must be connected
to an optional Battery Charge cable that is supplied only with the Slim
Port Replicator. When the battery charger is connected to the Battery
Charge cable, you can use it to charge the main battery and the optional
High Capacity 2nd Battery Pack. For details, refer to the information
sheet describing use of the Slim Port Replicator and Battery Charge
cable.

USB FDD Kit

The 3 1/2" external diskette drive module can be connected to the USB
port. For details on connecting the 3 1/2" external diskette drive module,
refer to Chapter 4, Operating Basics.

Slim Port Replicator

In addition to the ports available on the computer, the Slim Port
Replicator provides, an external monitor port, four USB ports, a port for
charging a High Capacity 2nd Battery Pack, a LAN jack and a DC-IN
socket. The Slim Port Replicator connects directly to the docking
interface on the bottom of the computer. The AC adaptor connects the
Slim Port Replicator to a power source.
Portégé R100
Optional Devices
8-9