Further, PLANET reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes.
Local Area Networks - communication speed. Hundred times as fast as the existing 100Base-TX solutions, using the PLANET ENW-9800 to connect your servers and workstations guarantees extremely high throughput and excellent signal quality.
Chapter 2 Hardware Installation 2.1 LED definitions The faceplate of ENW-9800 has three LEDs: 100, 1000 and ACT. The pictures below have showed the faceplate of ENW-9800. Table 2-1 explains the function and state of the LEDs. Link / ACT LED Link / ACT LED Faceplate of ENW-9800 Description...
2.2 Hardware Installation Step 1: Please turn off your PC. Step 2: Remove any metal decorations from your hands and wrists. Step 3: Remove the cover from your PC. Step 4: Locate an empty PCI Express slot and remove the corresponding back plate. Save the screw for use in Step 6.
Chapter 3 Driver Installation A device driver must be installed before your ENW-9800 can be used with your computer. This chapter describes how to install the driver for various operating systems. Before you begin the driver installation process, make sure you have the installation disks for your computer’s operation system nearby. 3.1 Installing Driver to Windows Server 2003/2003R2 The following installation operates under Window2003R2.
Page 8
Win2003R2 will show you this dialog box to prompt you the driver is not digitally signed by Microsoft, please press “Continue Anyway” to continue.
Please click “Finish” to complete the driver installation. 3.2 Installing VLAN Support Driver To Windows Server 2003/2003R2 Open Network Connection properties by Start\Settings\Control Panel\Network Connections then click “Install” Button.
Page 10
Select "Protocol" and click "Add” button In "Select Network Protocol" window click "Have Disk” Button Press “Browse” to specify ENW-9800 VLAN driver location to install. (Assume "E" is your CD-ROM drive, you can find ENW-9800 driver in E:\planet_NIC10G\3.23\tools\vlan\W2003). Please click “OK” to continue.
Page 11
In "Select Network Protocol" window select "PLANET Dual 10GbE Server Adapter VLAN Protocol Driver" Win2003R2 will show you this dialog box to prompt you the driver is not digitally signed by Microsoft, Pease press “Continue Anyway” to continue.
Page 12
Wait a moment or more until "Select Network Protocol" window is closed and installation is completed...
*Model Number : ENW-9800 * Produced by: Manufacturer‘s Name : Planet Technology Corp. Manufacturer‘s Address : 11F, No. 96, Min Chuan Road, Hsin Tien, Taipei, Taiwan, R.O.C. is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility Directive on (89/336/EEC).