Introduction; Features - Belkin F5D7000ecE User Manual

Introduction

The 802.11g Wireless PCI Adapter is a 54 Mbps wireless network adapter that
seamlessly integrates with existing Ethernet networks to support applications such
as mobile users or temporary conferences. This solution offers a high data rate and
reliable wireless connectivity with considerable cost savings over wired LANs (which
include long-term maintenance overhead for cabling.) Just install enough wireless
access points to cover your network area, plug wireless cards into your PCs, and
start networking. Using this card in conjunction with a wireless access point, you
can create an instant network that integrates seamlessly with 10/100 Mbps Ethernet
LANs. Moreover, moving or expanding your network is as easy as moving or installing
additional access points – no wires!

Features

• Wireless connection without the hassles and cost of cabling
• Greater flexibility to locate or move networked PCs
• Integrates with or replaces wired LANs at dramatically lower cost than
wired alternatives
• Seamless connectivity to wired Ethernet LANs augments existing networks
quickly and easily
• Easy installation
• Direct Sequence Spread-Spectrum (DSSS) technology provides robust,
interference-resistant and secure wireless connection
• Complemetary Code Keying (CCK) ensures backward compatibility to
the existing IEEE 802.11b WLAN infrastructure
• Orthogonal Frequency Division Multiplexing (OFDM) provides the speed
required for today's high-bandwidth application
• Supports Windows 98SE/Me/2000/XP
• Supports WEP (Wired Equivalent Privacy) and WPA (Wi-Fi Protected
Access) security
• Provides a user-friendly interface for configuration
• Firmware upgradeable
• Extended range feature supported
1