Turn Off 3D Display / Turn On 3D Display; Safety Preferences; Enable/Disable Pois - TomTom ECLIPSE User Manual

Turn off 3D display / Turn on 3D display

Tap this button to view the map from above while you are navigating.
Turn off 3D
display
To switch back to seeing the map from your perspective as you drive, tap
Turn on 3D display.
When should I use this?
Turn on 3D
display
In some situations, it is easier to see the map from above. Perhaps if the
roads are very complicated or if you are walking and using your TomTom to
navigate.

Safety preferences

Tap this button to enable or disable the safety lock.
Safety
preferences
Safety lock
When you enable the safety lock, you are not able to access all buttons and
features of your TomTom while driving.
The Main Menu shows only a few buttons that may be needed while you are
driving.
As soon as your car stops moving, you will be able to access all of the buttons
and features again.

Enable/disable POIs

Tap this button to set which categories of Points of Interest (POIs) should be
shown on the map.
Enable/
disable POIs
Select the POIs that you want to see on the map from the list:
When you select a POI, it will be shown on the map by the symbol you can see
next to each category in the list above.
To find a category of POI quickly, tap Find, then start to type the name of the
POI category. As soon as the category is shown in the list, you can select it.
For more information about POIs, see Points of Interest on page 27.
39