Specifications; Operation - Ryobi LCD1802 Owner's Operating Manual

GENERAL POWER TOOL SAFETY WARNINGS
Keep cutting tools sharp and clean. Properly
■
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc.,
■
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power tool
for operations different from intended could result in a
hazardous situation.
BATTERY TOOL USE AND CARE
Recharge only with the charger specified by the
■
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
Use power tools only with specifically designated
■
battery packs. Use of any other battery packs may
create a risk of injury and fire.
When battery pack is not in use, keep it away from
■
other metal objects, like paper clips, coins, keys,
nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
Under abusive conditions, liquid may be ejected
■
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation or
burns.
SERVICE
Have your power tool serviced by a qualified repair
■
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
This appliance is not intended for use by persons
■
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervi-
sion or instruction concerning use of the appliance
by a person responsible for their safety. Children
should be supervised to ensure that they do not
play with the appliance.
This appliance is not intended for use by young
■
children or infi rm persons unless they have been
adequately supervised by a responsible person to
ensure that they do not play with the appliance.
Keep children and visitors away. Visitors should
■
wear safety glasses and be kept a safe distance from
work area. Do not let visitors contact tool or extension
cord.
English
Complies with AS/NZS 60335.
■

SPECIFICATIONS

Voltage
Chuck (mm)
Switch
No load speed (drill mode):
- Lo speed
- Hi speed
Clutch
Max. Torque (Nm)
Max. Spade Bit (mm)
Weight - not incl.battery pack (KG)
MODEL
LCD1802

OPERATION

WARNING
Do not allow familiarity with products to make you
careless. Remember that a careless fraction of a
second is sufficient to inflict serious injury.
WARNING
Always wear safety goggles or safety glasses with
side shields when operating products. Failure to
do so could result in objects being thrown into your
eyes, resulting in possible serious injury.
WARNING
Do not use any attachments or accessories
not recommended by the manufacturer of this
product. The use of attachments or accessories
not recommended can result in serious personal
injury.
APPLICATIONS
You may use this product for the purposes listed below:
Drilling in all types of wood products (lumber,
■
plywood, paneling, composition board, and hard
board)
2
18 V
2-13
Variable speed
0 - 440 min-
0 - 1600 min-
24 Positions
37.5
32
1.28
BATTERY PACK CHARGER
(not included)
(not included)
BPL-1820 BCL-1800
BPL-1815 BCS618
ABP1801
BATTERY PACK CHARGER
(not included)
(not included)
ABP1801 ACR-180
1
1