Ryobi LCD1802 Owner's Operating Manual

Ryobi LCD1802 Owner's Operating Manual

Compact drill driver

Advertisement

LCD1802
COMPACT DRILL DRIVER
OWNER'S OPERATING MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LCD1802 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ryobi LCD1802

  • Page 1 LCD1802 COMPACT DRILL DRIVER OWNER’S OPERATING MANUAL...
  • Page 2 DESCRIPTION 1. Keyless Chuck Torque Adjusting Ring 17. High Speed 2. Switch Trigger 10. To Decrease Torque 18. Low Speed 3. Direction of Rotation Selector (Forward/reverse) 11. To Increase Torque 19. Two-Speed Gear Train 4. Double-Ended Bits 12. Reverse 20. Bit Storage 5.
  • Page 3 Fig. 7 Fig. 8 Fig. 9 Fig. 10...
  • Page 4 Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications...
  • Page 5: General Power Tool Safety Warnings

    English GENERAL POWER TOOL SAFETY WARNINGS the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. WARNING Read all safety warnings and all instructions. Use personal protective equipment. Always wear ■...
  • Page 6: Specifications

    BCS618 other metal objects, like paper clips, coins, keys, ABP1801 nails, screws, or other small metal objects that can make a connection from one terminal to another. LCD1802 BATTERY PACK CHARGER Shorting the battery terminals together may cause (not included) (not included) burns or a fire.
  • Page 7 ■ Mixing paint ■ SWITCH TRIGGER This product will accept Ryobi One+ 18 V lithium-ion battery packs and Ryobi One+ 18 V nickel-cadmium See Figure 3. battery packs. To turn the drill ON, depress the switch trigger. To turn it OFF, release the switch trigger.
  • Page 8 English OPERATION BIT STORAGE See Figure 7. KEYLESS CHUCK When not in use, bits provided with the drill can be placed See Figure 4. in the storage area located on the base of the drill. The drill has a keyless chuck to tighten or release drill MAG TRAY™...
  • Page 9: Maintenance

    WARNING: breaking through material. If not prepared, this When servicing, use only identical Ryobi loss of control can result in possible serious replacement parts. Use of any other parts may injury.

Table of Contents

Save PDF