Sharp TM100 Operation Manual page 94

Setting tempo and the type of chords
4
Press a or b to highlight one of the tempos
below and press B.
The tempos: "Allegro (Fast)"
"Moderato (Normal)"
"Andante (Slow)"
"Adagio (Very Slow)"
Tempo is defined by the number of crochet beats
( ) played per minute (bpm).
5
Press a or b to highlight "8 chords," "16
chords," or "32 chords" and press B.
The "Score Input" screen appears.
Input melody
6
Press the digit key to specify the pitch of the
musical note or rest.
For more information, refer to "To input a melody" on
page 12-95.
7
Press P or R to specify the length of the
musical note or rest.
For more information, refer to "To input a melody" on
page 12-95.
8
Press d after inputting one note.
Input the next note after the cursor moves to the
right.
12-94
9
Repeat steps 6 to 8 to complete the melody.
When you press
you have entered is played back.
C
Press
150
while entering notes, to playback the melody
125
displayed on the screen up to the cursor position.
107
Press
94
select another chord. Repeat steps 6 to 8 to input
notes for the new chord.
Save the ringtone
10
When you finish inputting, press C [Options].
The "Options" menu appears.
11
Press a or b to highlight "Save" and press B.
12
Press a or b to highlight "Save to My sounds"
and press B.
You can copy, cut, and paste notes by using the
"Options" menu in the "Score Input" screen.
If the capacity or memory in "My sounds" becomes
insufficient, the message "Maximum capacity: 250
Not registered." or "Not registered. Memory full." is
displayed. The display returns to the screen of
step 12. Try again after deleting unnecessary
items.
B
during input, the melody that
[Options] and select "Play before Cursor"
C
[Options] and select "Select Chord", to