Camera Operation; Rf Connector - Sharp TM100 Operation Manual

RF Connector

This RF connector is for connecting Sharp-approved
antennas to the handset. Do not connect unapproved
or modified equipment as this may damage the
handset or cause the SAR limit to be exceeded.
Do not touch or crowd the connector unnecessarily as
this may affect standby and call times.
To avoid interfering with blasting operations, turn off
the handset in a blasting area or in a place where a
"turn off two-way radio" sign is posted.

Camera Operation

Learn picture quality, file formats, etc. beforehand.
Pictures can be saved in JPEG format.
Be careful not to move your hand while taking pictures.
If the handset moves while taking a picture, the picture
can be blurred. When taking a picture, hold the
handset firmly to prevent it from moving, or use the
delay timer.
Clean the lens before taking a picture. Fingerprints, oil,
etc. on the lens hinder clear focusing. Wipe with a soft
cloth before taking a picture.
Miscellaneous
As the handset uses an electronic storage unit, data
may be lost or corrupted under various circumstances.
1-6
Before connecting the handset to a PC or a peripheral
unit, read the operation manual for the other unit
carefully.
If the handset's battery has been removed for some
time, or the handset has been reset, the unit's clock
and calendar may be reinitialised. The date and time
should be updated.
Use only the attached hands free. Some handset's
functions may not work when unauthorised hands free
are used.
The handset uses the magnet to recognise that the
handset is closed. Do not place magnetic cards near
your handset or get the card caught in the handset as
it may damage the recorded data.
Environment
Keep your handset away from extreme heat. Do not
leave it on the dashboard of a car or near a heater. Do
not leave it in any place that is extremely damp or
dusty.
Since this product is not waterproof, do not use it or
store it where fluids can splash onto it. Raindrops,
water spray, juice, coffee, steam, perspiration, etc.
may also cause a malfunction.