Using The Remote Controller; How To Start, Stop, Change The Mode, And Adjust The Temperature - Mitsubishi Electric PAR-21MAA Instruction Book

Note:
Your new entries at Steps 2 and 3 will be cancelled if you press the Mode (Return) button
2 before pressing the Filter button 4.
5. Press the Mode (Return) button 2 to complete the setting procedure. This will return
the display to the standard control screen, where 1 will now show the newly set day
and time.
5

Using the Remote Controller

(1) How to Start, Stop, Change the Mode, and Adjust the Temperature

2
3
˚C
3
TEMP.
2
MENU ON/OFF
BACK MONITOR/SET DAY
PAR-21MAA CLOCK
<To Start Operation>
I Press the ON/OFF button 1.
• The ON lamp 1 and the display area
come on.
Note:
G When the unit is restarted, initial settings
are as follows.
Remote Controller settings
Mode Last operation mode
Temperature
Last set temperature
setting
Fan speed Last set fan speed
Horiz.
COOL or DRY
outlet
Last
Airflow up/
Mode HEAT
setting
down
Horiz.
FAN
outlet
– 7 –
6
4
5
˚C
8
ON/OFF
7
FILTER
CHECK TEST 1
OPERATION CLEAR
1
5
6
7 8
<To Stop Operation>
I Press the ON/OFF button 1 again.
• The ON lamp 1 and the display
area go dark.