Adjusting Cutting Height; Operation - Kogan RELWN4AMWRA User Manual

4. Adjusting cutting height

Stop, release the switch lever and wait until the motor stops before adjusting height. The blades
continue to rotate after the machine was switched off. A rotating blade can cause injury.
Caution - do not touch rotating blades.
For the first cutting of season , a high cutting adjustment should be selected.,
The mower can be set to 6 cutting heights, between 25mm and 75mm. Press the height of cut lever inwards,
then lift or push down the mower until required height is selected.
The Lawn mower may be set to 25mm by moving the blank plate .
Using a cut height between 25mm to 35mm will further shorten the battery duration.
1. TIPS for the use of this battery-powered mower
Under Normal conditions, the battery should run for approximately 30 minutes per single
charge, this operation time and the area that can be mown by this battery-powered mower is
dependent on various factors. These are:
Figure 6
Type of lawn
Battery-powered lawnmowers are suitable for lawns which are mown frequently, for example, Battery-
powered mowers are not suitable for infrequently-mown meadows or similar. To produce a well-maintained
lawn, we recommend mowing the lawn as often as you can, once a week if possible, so that you are only
cutting 1 to 2 inches (20mm to 50mm) of grass each mowing session （see figure 6）. Trying to cut more
than 2 inches (50mm) will drastically reduce the charge life of the battery and quality of the cut. After
relatively long intervals between mowing (holiday lawn), first of all cut in one direction with the cutting height
as high as possible, then cut in the crosswise direction at the cutting height required.

Operation

8