Mowing Tips - Kogan RELWN4AMWRA User Manual

Mowing with Mulching Fitment
See Figure 13
Danger! Risk of injury! Do not put your hand in the discharge opening
Remove the grass collection bag and then insert the Mulching Fitment
The mulching fitment will click into place, sealing off the grass chute.
The grass will be rotated in the deck and be cut several times till into tiny tips, then discharged onto the
lawn.
Figure 13
Instructions for mowing without the grass collection bag
We recommend:
 The grass should not be too high nor too wet!
 Move slowly while mowing
 Do not cut grass more than 20mm (see Figure 14)

Mowing tips:

If grass residue is left in the discharge opening, pull mower backwards about 1-2m so that the grass residue
can drop out downwards.
To produce a well-maintained lawn, we recommend mowing the lawn as often as you can, once a week if
possible, so that you are only cutting 1 to 2 inches (20mm to 50mm) of grass each mowing session （see
figure 6）. Trying to cut more than 2 inches (50mm) will drastically reduce the charge life of the battery and
quality of the cut.
Before starting the mower, adjust the cutting height so that you only cut 1 to 2 inches (20 mm to 50mm) of
grass at a time（see figure 6）. Cut thicker grass at a higher cutting height, or cut a narrower swath. Do not
force the mower forward in tall, thick or wet grass.
After relatively long intervals between mowing (holiday lawn), first of all cut in one direction with the cutting
height as high as possible, then cut in the crosswise direction at the cutting height required.
Figure 14
13