Lenovo ThinkCentre 3026 Hardware Maintenance Manual page 86

Figure 18. Removing a PCI card
Notes:
a. The card fits tightly into the card slot. If necessary, alternate moving each side of the card a small
amount until it is removed from the card slot.
b. If the card is held in place by a retaining latch, press the card retaining latch
the latch. Grasp the card and then gently pull it out of the slot.
5. Remove the new PCI card from its static-protective package.
6. Install the new card into the appropriate slot on the system board. See "Locating parts on the system
board" on page 100.
Note: If you are installing a PCI Express x16 graphics card, make sure the memory slot retaining clips
are closed before you install the graphics card.
7. Pivot the card latch to the closed position to secure the PCI card.
80
ThinkCentre Hardware Maintenance Manual
1 as shown to disengage