Lenovo ThinkCentre 3026 Hardware Maintenance Manual page 56

Thinkcentre
Hide thumbs Also See for ThinkCentre 3026:
Table of Contents

Advertisement

Diagnostic Error Code
025-00X-XXX 025-01X-XXX IDE interface failure
025-027-XXX IDE interface Configuration/Setup error
025-02X-XXX 025-03X-XXX 025-04X-XXX IDE Interface
failure
025-195-XXX IDE interface Test aborted by user
025-196-XXX IDE interface test halt, error threshold
exceeded
025-197-XXX IDE interface test warning
025-198-XXX IDE interface test aborted
025-199-XXX IDE interface test failed, cause unknown
030-000-XXX SCSI interface Test Passed
030-00X-XXX 030-01X-XXX SCSI interface failure
50
ThinkCentre Hardware Maintenance Manual
FRU/Action
1. IDE signal cable
2. Check power supply voltages
3. Reseat IDE signal cable
4. IDE device
5. System board
1. IDE signal cable
2. Flash the system. See "Updating (flashing) BIOS from
a disc" on page 564.
3. Reseat IDE signal cable
4. IDE device
5. System board
1. IDE signal cable
2. Check AC/DC power adapter
3. Reseat IDE signal cable
4. IDE device
5. System board
Information only Restart the test, if necessary.
1. Press F3 to review the log file.
2. Restart the test to reset the log file.
1. Make sure the component that is called out is
connected and/or enabled. See "" on page .
2. Re-run the test.
3. Replace the component that is called out in warning
statement.
4. Replace the component under test.
1. If a component is called out, make sure it is connected
and/or enabled. See "" on page .
2. Flash the system and re-test. See "Updating (flashing)
BIOS from a disc" on page 564.
3. Go to "Undetermined problems" on page 60.
1. Go to "Undetermined problems" on page 60.
2. Flash the system and re-test. See "Updating (flashing)
BIOS from a disc" on page 564.
3. Replace component under function test.
No action
1. SCSI signal cable
2. Check AC/DC power adapter
3. SCSI device
4. SCSI adapter card, if installed
5. System board

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents