Advertisement
S afe operation of this power tool requires that you read and
understand this operator's manual and all labels affixed to
the tool. Safety is a combination of common sense, staying
alert, and knowing how your bench grinder works.
READ ALL INSTRUCTIONS
KNOW YOUR POWER TOOL.
carefully. Learn the applications and limitations as well
as specific potential hazards related to this tool.
GUARD AGAINST ELECTRICAL SHOCK
body contact with grounded surfaces. For example:pipes,
radiators, ranges, refriqerator enclosures.
KEEP GUARDS IN PLACE
operate the tool with any guard or cover removed. Make
sure all guards are operating properly before each use.
REMOVE ADJUSTING KEYS AND WRENCHES.
of checking to see keys and adjusting wrenches are
removed from tool before turning it on.
KEEP THE WORK AREA CLEAN.
and work benches invite accidents.
AVOID DANGEROUS ENVIRONMENTS.
tools near gasoline or other flammable liquids, in damp
or wet locations or expose them to rain. Keep work area
well lighted.
KEEP CHILDREN AND VISITORS AWAY.
wear safety glasses and be kept a safe distance from
work area.
MAKE WORKSHOP CHILD PROOF
switches, or by removing starter keys.
DON'T FORCE THE TOOL.
at the rate for which it was designed.
USE THE RIGHT TOOL.
to do a job for which it was not designed.
USE THE PROPER EXTENSION CORD.
extension cord is in good condition. When using an
extension cord, be sure to use one heavy enough to
carry the current your product will draw. An undersized
cord will cause a drop in line voltage resulting in loss of
power and overheating . A wire gauge size (A.W.G.) of at
least 16 is recommended for an extension cord 8 metres
or less in length. If in doubt, use the next heavier gauge.
The smaller the gauge number, the heavier the cord.
INSPECT EXTENSION CORDS PERIODICALLY
replace if damaged.
WEAR PROPER APPAREL.
neckties, or jewelry that can get caught in the tool's
moving parts and cause personal injury, Nonslip footwear
is recommended when working outdoors. Wear
protective hair covering to contain long hair.
ALWAYS WEAR SAFETY GLASSES WITH SIDE
SHIELDS.
Everyday eyeglasses have only impact-
resistant lenses; they are
PROTECT YOUR LUNGS.
if the cutting operation is dusty.
RULES FOR SAFE OPERATION
Read the operator's manual
by preventing
and in working order. Never
Form habit
Cluttered work areas
Do not use power
All visitors should
with padlocks, master
It will do the job better and safer
Do not force the tool or attachment
Make sure your
Do not wear loose clothing,
safety glasses.
NOT
Wear a face or dust mask
PROTECT YOUR HEARING.
extended periods of operation.
DON'T ABUSE CORD.
it to disconnect from receptacle. Keep cord away from
heat, oil, and sharp edges.
DO NOT OVERREACH.
at all times.
MAINTAIN TOOLS WITH CARE.
for best and safest performance.Follow instructions for
lubricating and changing accessories.
NEVER LEAVE TOOL RUNNING UNATTENDED.TURN POWER
OFF.
Disconnect all tools when not in use, before
servicing, or when changing attachments, wheels, etc.
AVOID ACCIDENTAL STARTING.
plugging in.
USE RECOMMENDED ACCESSORIES.
accessories may cause risk of injury.
USE ONLY GRINDING WHEELS
rated greater than 2850
DO NOT
use wheels with incorrect size bore.
use wheel washers or wheel screws that are defective
or incorrect and
moving parts.
NEVER STAND ON TOOL.
the tool is tipped or if the wheel is unintentionally contacted.
DIRECTION OF FEED.
never grind without the workrest being properly set.
NEVER
grind more than one workpiece at a time.
WARNING:
CHECK DAMAGED PARTS. Before further use of the
tool, a guard or other part that is damaged should be
carefully checked to determine that it will operate properly
and perform its intended function. Check for alignment of
moving parts, binding of moving parts, breakage of parts,
mounting and any other conditions that may affect its
operation. A guard or other part that is damaged must be
properly repaired or replaced by an authorised service
centre to avoid risk of personal injury.
and
KEEP TOOL DRY, CLEAN, AND FREE FROM OIL AND
GREASE. Always use a clean cloth when cleaning. Never
use brake fluids, gasoline, petroleum-based products, or
any solvents to clean tool.
INSPECT TOOL CORDS AND EXTENSION CORDS
PERIODICALLY and, if damaged, have repaired by a
qualified service technician. Stay constantly aware of cord
location and keep it well away from the rotating wheel.
NEVER USE IN AN EXPLOSIVE ATMOSPHERE. Normal
sparking of the motor or sparking from grinding metal
could ignite fumes.
Page 2
Wear hearing protection during
Never carry tool by the cord or yank
Keep proper footing and balance
Keep tools sharp and clean
Be sure switch is off when
The use of improper
that comply with
.
RPM
NEVER
touch grinding wheel or other
Serious injury could occur if
Be aware of wheel rotation direction;
Wheel coasts after turn off.
and
SAA
NEVER
Hide quick links:
Advertisement
