operating power tools may result in serious GENERAL POWER TOOL SAFETY WARNINGS personal injury. b. Use personal protective equipment. Always WARNING wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or Read all safety warnings and all instructions. Failure hearing protection used for appropriate conditions to follow the warnings and instructions may result in will reduce personal injuries.
g. Use the power tool, accessories and tool bits specifically designed and recommended by the tool manufacturer. Just because the accessory etc., in accordance with these instructions and can be attached to your power tool, it does not in the manner intended for the particular type assure safe operation.
Page 7
or snagged and your hand or arm may be pulled have a tendency to snag the rotating accessory into the spinning accessory. and cause loss of control or kickback. e. Do not attach a saw chain woodcarving blade Never lay the power tool down until the accessory has come to a complete stop.
Grinding metal or cutting materials such as metal or stone. k. Check that the workpiece is properly supported. Use only grinding wheels approved by RYOBI. Use the tool only for approved applications. Use of the power tool for operations different from intended could m.
A grinding wheel is included in the standard accessories WARNING for some countries. Check carefully whether or not there are cracks in the wheel. Replace a cracked wheel immediately. OPERATION For grinding wheel: WARNING 1. Attach the disc fl ange, the grinding wheel and ensure the clamp nut is turned to correct position on the Before you plug in your tool, make sure that the power spindle.
Wear safety hand gloves After use, check the tool to make sure that it is in good condition. It is recommended that you take this tool to a Ryobi Wear non-slip safety footwear when authorised service center for thorough cleaning and using this equipment lubrication at least once a year.