Smeg Fridge-freezer Instructions For Use Manual page 13

Temperature setting Temperature setting
Other settings Other settings
Refrigerator temperature setting
span
Freezer temperature setting span
• Freezer temperature is set by the button (A), and refrigerator
temperature by the button (N).
• When you press one of temperature setting buttons, the
digital display starts fl ashing and indicates the last selected
temperature.
• Temperature setting is changed by short sequence pressing
of the button in steps of 1°C. During the setting procedure all
other buttons are void.
• Around 5 seconds after the release of the button, the
display automatically indicates the actual temperature in the
refrigerator and in the freezer.
Continuous sound - opened refrigerator door - alarm
If the refrigerator door is open for more than one minute, the
sound signal (continuous tone) starts and red LED (H) appears.
Alarm goes off by closing the door, or by pressing the alarm off
button (G).
Intermittent sound - refrigerator/freezer temperature too high
- alarm
Elevated temperature within the appliance is signaled by the
sound alarm (intermittent tone), and the temperature fl ashing on
the display.
• Alarm is switched off by pressing the alarm off button (G).
The red LED and fl ashing temperature are switched off
automatically when the interior of the refrigerator/freezer is
cool enough, and there is no danger for perishable goods
• If the temperature in the freezer compartment fails to reach
the required level even 24 hours after the alarm had been
shut down, the sound alarm is switched on again and shuts off
automatically when the freezer compartment cools down to the
required level and there is no danger for perishable food. After
fi rst start the appliance has a 24-hour alarm delay to avoid
unnecessary panic
+1°C do +9°C
-16°C to -24°C
+ fast freeze
13