Smeg Fridge-freezer Instructions For Use Manual page 10

Refrigerator temperature Refrigerator temperature
setting setting
(control panel I) (control panel I)
Start of fan assisted Start of fan assisted
cooling cooling
(control panel I) (control panel I)
10
• Temperature of the appliance is set by turning the button (B) to
the position between the Min and Max span.
• Recommended setting of the thermostat knob is to ECO
position.
• If the temperature in the room where the appliance is installed
is lower than 16°C or if there is less than 10 kg of food in the
refrigerator, we recommend setting the thermostat dial to Max.
The fan (only with some models) should be switched off. This
is required in order to maintain a suffi ciently low temperature in
the freezer to allow long-term storage of frozen food.
• In case of exceptionally higher ambient temperatures it is
recommended to switch the fan operation at high speed by
pressing button (D) – only for models featuring control panel I.
• SF/SC position
- SF position stands for "Super frost" and indicates fast
freezing (certain models only).
- SC position stands for "Super cool" and indicates fast
cooling (certain models only).
• In apliances with digital display the indicator fl ashes during the
setting procedure, and the beep signals each change of preset
temperature. When fl ashing stops the fi nal setting is stored in
memory.
• When the appliance is switched on, the display (A) will fl ash for
a few seconds – the set value will be indicated. After a while,
the actual or maximum value is indicated. This value will remain
on the display until the actual temperature in the refrigerator
compartment falls below the displayed level.
Fan assisted fast cooling is started by pressing the button (D).
Orange LED is on. Fan eliminates minor temperature differences
between different cabinet spaces, and reduces dew formation on
the interior surface of the appliance.
The fan operates only at closed refrigerator door.