Listening To A Cassette; Selecting The Cassette Playback Mode; Tape Counter; Maintaining The Sound Quality - Samsung MM-N7 Instruction Manual

Micro component system with remote control
Hide thumbs Also See for MM-N7:
Table of Contents

Advertisement

Listening to a Cassette

1
GB
Switch the system on by pressing On/Standby.
2
Select the TAPE function by pressing TAPE on the front panel.
3
Open the cassette deck by pushing on the corner of the cover
marked Push Open
4
Insert the pre-recorded cassette with the open edge of the
tape facing downwards.
5
Close the deck by pushing on it until it clicks into place.
6
To listen to...
Side A
Side B
Result:
The cassette starts playing.
7
To...
Adjust the volume
Stop the playback or search
8
When the cassette is stopped, select one of the following
functions as required.
To...
Rewind the cassette
Fast-forward the cassette
The cassette player stops automatically when the
beginning or end of the cassette is reached.
3 5
TUNER
CD
TAPE
AUX
On/
Standby
Band
Repeat
CD Repeat
(A
B)
Tuning Mode
CD Synchro REC/Pause
Power
Preset EQ
Surround
CD Re eat
/Set
Shuffle
TAPE
8
8
7
CD
VOL
10
until you hear a click and then releasing it.
Press...
Press...
VOL. + or – (or the
VOLUME + or – buttons
on the front panel)
STOP (
)
Press...
2 6
TUNER
CD
TAPE
AUX
On/
Standby
Band
1
Repeat
CD Repeat
(A
B)
Tuning Mode
7
Preset EQ
Counter
VOL.
VOL.
7
Tuning
Mode
CD
7
VOL.
VOL.

Selecting the Cassette Playback Mode

Your micro audio system has three cassette playback modes which
enable you to listen to both sides of a cassette automatically.
Press TAPE Mode one or more times to display the required symbol.
When the display
indicates...

Tape Counter

When playing a cassette, a counter is displayed to enable you to take
note of the counter value at the start of each track and thus start
playback at the beginning of the track to which you wish to listen.
The counter is only displayed when a cassette is being played.
Before starting to record a cassette for which you wish to take note of
the counter values at the beginning of each track, reset the counter by
pressing Tape Counter.
CD Synchro REC/Pause
Power
Surround

Maintaining the Sound Quality

To obtain the best possible results from your cassette player,
you must clean it regularly (heads, roller and drive capstan).
Open the deck by pressing the Push Open
CD
Use a cotton bud and a special cassette cleaning agent to clean the:
Heads (
Roller (
Drive capstan (
To guarantee hours of enjoyable listening with your cassettes:
Check that the tape in the cassette is always sufficiently taut.
Store your cassettes in a clean place, out of direct sunlight, where
they will not be exposed to high temperatures.
Avoid using 120-minute cassettes as they are extremely fragile.
3
2
You can select this function during playback or when the
cassette is stopped.
The system plays back...
One side of the cassette and then stops.
One side of the cassette
The other side of the cassette and then stops
Both sides of the cassette indefinitely (both sides
are played one after the other until you stop the
player).
VOLUME
Phones
Program
Tape
CD Repeat
Shuffle
/Set
Counter
TAPE
button.
)
)
)
3
1
2
Open/Close
Mic

Advertisement

Table of Contents
loading

Table of Contents