Software Update; Enter Setup Wizard; Sw Version And Radio Id; Backlight - Kogan KASPKI5WNGA User Manual

Software Update

From time to time, your radio may find software upgrades available with bug fixes and/or additional
features.
If your radio detects that newer software available, it asks if you want to go ahead with an update. If you
agree, the new software is then downloaded and installed.
After a software upgrade, all user settings are maintained.
Before starting a software upgrade, ensure that your radio is plugged into a stable mains power
connection. Disconnecting power during a software update may permanently damage the unit.
1. It can be activated from < MENU >  < Main menu >  < System settings >  < Software
update >  Auto-check setting, press SELECT to confirm. 'Check now' is also a convenient option
for your radio to detect new software
2. Turn SELECT to < YES >, press this knob to confirm.

Enter Setup Wizard

When this unit is started for the first time, it runs through a setup wizard to configure settings for date/time
and network.
Once this has finished, the system is ready to use in most modes.
1.
To run the setup wizard again, press
>
Setup wizard  Yes.
2.
Press SELECT to confirm, then step by step to set it.

SW Version and Radio ID

This information may be requested when dealing with technical support issues
It can be activated from < Main menu >  < System settings >  < Info >, press SELECT to confirm,
and then you will get it.

Backlight

For Power on condition:
1. Press MENU à < Main menu > à < System settings > à < Backlight > à 'Power-On Level',
Press SELECT to confirm.
2. Turn SELECT to cycle through options: High / Medium / Low.
3. Press SELECT to confirm your preferred level. Setting to high level is recommended for power on
condition.
For Standby condition:
Above setting principle suit for standby condition too. However, setting to low level is recommended.
C A U T I O N
< > <
MENU  Main menu
21
> <
 System settings
> <
