Table of Contents
Advertisement
Turning on
1.
Connect DC power adapter to your Internet Radio.
2.
Press
to switch on your radio. For initial use, a 'Setup
wizard' dialog will display.
Setup wizard
1.
Continue the above step, press SELECT to confirm 'YES', and then turn SELECT to your preferred
'hour format', press SELECT to confirm.
2.
Press SELECT to confirm 'Update from Network'. Now, follow your radio's instruction, configure the
following parameters:
Timezone: select your local timezone.
Daylight saving: On or Off
SSID: In some cases radio may find more than one network, turn SELECT to your selected one, then press
SELECT.
Note: If a password (WEP/WPA) isn't required by your network, radio will connect to the network
automatically.
3.
If a WEP/WPA key (password) is required, radio will show
you to input the WEP/WPA code and display the password
entry screen.
Turn SELECT to cycle through the alphanumeric character
list, press SELECT to select an appointed character.
Note: WEP/WPA pass codes are case-sensitive.
If a wrong operation is being conducted, select '
to delete designated character.
Note: a.>
b.> the method of select
cursor point to '
, then continue anti-clockwise turn SELECT to select
or
Internet Radio Mode
= Backspace.
,
', anti-clockwise turn SELECT to select
in turn.
'
or
: while
6
Advertisement
Table of Contents
