Table of Contents
Advertisement
General Operation
1.
Press MODE repeatedly until < DAB radio > is showing up. For initial use, it will carry out a full scan
and store stations list in memory.
Note: or press MENU to enter < Main menu >, and then turn SELECT to < DAB >, press this knob to confirm
2.
If you want to perform a full scan at any time, you can press MENU, turn SELECT to < Scan >, and
then press SELECT to confirm.
3.
Once the scanning is completed, the DAB+ stations will be displayed in alphanumeric order. The first
station in the list will be selected.
Note: if no DAB+ signal is found in your area, it may be necessary for you to relocate your radio.
Shift to another DAB+ Station
1.
While a DAB+ program is playing, press TUNE to activate 'turn to tune'.
2.
Turn SELECT to cycle through stations list, and then press this knob to confirm.
Dynamic Label Segment (DLS)
1. This is scrolling text information supplied by the DAB+ station. It may comprise information on
music title or detail of the program and is provided by the broadcaster.
2. To view further information, press INFO repeatedly, screen will appear displaying information
such as Artist, Album, Playback buffer indicate bar and Today's Date etc.
Prune invalid
To remove still listed, but currently unavailable stations,
1. Press MENU, and then turn the SELECT knob to < Prune invalid >, press this knob to confirm.
2. Turn the SELECT knob to 'YES', and press it to confirm.
DRC (Dynamic Range Control) value
You can set the level of the compression of stations to eliminate the differences in dynamic range or
sound level between radio stations.
Note: a. Set DRC to off indicates no compression.
DAB Mode
13
.
Advertisement
Table of Contents
