Rear View; Installation Site; Transporting The Machine To Its Installation Site; Washer-Dryer Stack - Miele T 7944 C Operating Instructions Manual

Installation and connection

Rear view

Protruding lid for holding when
moving the machine (see arrows)
Air inlet vent for cooling the
condenser unit
Mains connection cable
External drainage of the condensed
water
Accessories for connection to a sink
drain outlet
42

Installation site

,
The machine lid must not be
removed.
The dryer can be pushed under a
worktop with its lid in place, providing
the worktop is high enough.
,
Make sure the dryer door can be
opened without hindrance after
installation.
Transporting the machine to its
installation site
When moving the machine, you can
hold it by the lid where it protrudes to
the rear of the dryer. To manoeuvre the
dryer out of its packing case to its
installation site you will also need to
hold it by the front feet.

Washer-dryer stack

The tumble dryer can also be
combined with a Miele washing
machine in a washer-dryer stack. The
appropriate "WTV" stacking kit
(available to order) to match your dryer
is required.
,
Stacking kits must only be
installed by a suitably qualified fitter.