Sony HT-DDW5000 Operating Instructions Manual page 31

Performing Auto Calibration
TV INPUT
SLEEP DMPORT
VIDEO1 VIDEO2
Input
buttons
SAT TV
2CH A.F.D.
1 2
4 5
7 8
>10/
-/-- 0/10
CLEAR
DISPLAY
O
RETURN/EXIT
TV CH –
PRESET – REPLAY ADVANCE
. <
1
Press AMP MENU.
2
Press AUTO CAL.
Measurement starts in 5 seconds and the
display changes as follows:
A.CAL [5] t A.CAL [4] t A.CAL [3]
t A.CAL [2] t A.CAL [1]
While the time is counting down, stand
away from the measurement area to avoid
measurement error.
3
Measurement starts.
The measurement process will take a few
minutes to complete.
TV ?/1
?/1
AV ?/1
?/1
switch
SYSTEM STANDBY
BD DVD
SA-CD/CD TUNER
MOVIE MUSIC
DVD/BD
MENU
3
2
AUTO CAL
6
D.TUNING
9
D.SKIP
MEMORY AMP MENU
1
ENTER
TOOLS/
MUTING
OPTIONS
MUTING
TV VOL
MASTER VOL
MASTER
VOL +/–
MENU/HOME
TV CH +
PRESET +
< >
The table below shows the display when
measurement starts.
Measurement for Display
Environment noise
level
Speaker connection MEASURE and SP
Speaker level
Speaker distance
* The corresponding speaker indicator lights
up in the display during measurement.
4
Measurement ends.
"COMPLETE" appears on the display
and the settings are registered.
After you have finished
Disconnect the optimizer microphone from the
AUTO CAL MIC jack.
Notes
• Auto Calibration cannot detect the subwoofer.
Therefore, the subwoofer settings will be
maintained.
• If you have changed the position of the speakers, it
is recommended that you perform Auto Calibration
again to enjoy the surround sound.
• You cannot select Auto Calibration when the
headphones are connected.
Tips
• When Auto Calibration starts:
– Stand some distance away from the speakers and
the listening position to avoid measurement
failure. This is because test signals are output
from the speakers during measurement.
– Avoid making noise to get a more accurate
measurement.
• The Auto Calibration function will be canceled
when you do the following during the
measurement process:
– Press ?/1 or MUTING.
– Press the input buttons or turn the INPUT
SELECTOR on the receiver.
– Change the volume level.
– Connect the headphones.
– Press AUTO CAL again.
NOISE.CHK
DET. appears
alternately*
MEASURE and GAIN
appears alternately*
MEASURE and
DISTANCE appears
alternately*
31 GB