Other Problems - Leadtek TeVue User Manual

Other problems

Your TeVue is reliable and easy to use. If you encounter any problem while
using this product, please refer to the table below for possible solutions.
Power Indicator OFF
Plug power cord in the power
outlet in the wall.
Plug the power adapter in the
unit.
Turn on the power switch.
No image is displayed on TV
screen
Make sure the power indicator
is ON, and select the
appropriate video input for TV.
The unit is not responding when
the button is pressed
OK
Be sure the RJ-45 wire is
plugged into the "WAN" jack
directly on TeVue
Can not dial an IP address
Plug RJ-45 cable from the
Internet device into "WAN"
jack on the unit.
.
Video of local view is dark
Increase light on the image
and reduce back lighting.
Video in local view has a red cast
Aim TeVue
light source momentarily.
Increase the room light level.
Video connection is not
established correctly
Hang up and call again.
Make sure the remote video
phone is compatible with
H.323 standard.
Ask the other party call you.
Green or yellow blocks appear in
the remote picture
Probable cause is bad
connection (noisy line). Hang
up and try again. This time,
ask the other party to call you.
TeVue User's Manual
at a strong white
39