Omron M3 INTELLISENSE Instruction Manual page 24

3.Using the Unit
2.
Press the MEMORY button again,
while the average values screen is
displayed.
The result from the most recent
measurement is displayed.
The date and time of each
measurement is displayed
alternately with the measurement
values.
Important: If your systolic or
3.
Press the MEMORY button
repeatedly to cycle through the
previous measurement results.
Keep the button pressed down to
cycle rapidly through the previous
results.
If the irregular heartbeat symbol was displayed at the time of a
measurement, this is displayed when that result is displayed.
4.
Press the O/I START button to turn the unit off.
If you forget to turn the unit off, it will automatically shut itself off
after five minutes.
24
diastolic pressure is
outside the standard
range, the heartbeat
symbol will blink when
the measurement result is displayed.
Refer to 3.3, number 2.