Colour And Brightness; Volume Punch Through - One for All 2 User Manual

Depending on the functions of your original remote control, the ONE FOR
ALL 2 may operate the colour and brightness settings of your television.
Colour (+) = Press and release MAGIC then hold Volume (+)
Colour (-) = Press and release MAGIC then hold Volume (-)
Brightness (+) = Press and release MAGIC then hold Channel (+)
Brightness (-) = Press and release MAGIC then hold Channel (-)
You may be able to use some functions of your Television, Video recorder
at the same time. For example: if you are watching a program on your
video recorder, you can adjust the volume (a TV function) without pressing
the TV mode key on your ONE FOR ALL 2. The table below lists some of the
possibilities.
Last Device Mode Key Pressed:
VCR
To punch through to TV volume while in the VCR mode:
1.
2.
3.
To cancel the "Volume Punch Through" per mode:
(Example: to cancel the "Volume Punch Through" for the VCR mode)
1.
2.
3.
4.
VOL
Example: being in VCR mode, you will be able to control VOL+/- or MUTE
functions of your VCR (provided it has volume control).
To cancel the „Volume Punch Through":
1.
2.
3.
VOL
10
Extra Features

Colour and Brightness

Volume Punch Through

Press and hold MAGIC until the red light blinks
twice.
Press 9 9 3.
Then press the TV key and the red light will blink
twice.
Press VCR once.
Press and hold down the MAGIC key until the red
light blinks twice.
Press 9 9 3.
Then press the Volume (-) key and the red light will
blink four times.
Press and hold MAGIC until the red light blinks
twice.
Press 9 9 3.
Press the Volume (+) key and the red light will blink
four times.
You Can Control:
TV volume up and down, mute
WWW.ONEFORALL.COM