Table of Contents
Advertisement
(Continued)
ENTER
8
DATE
9
DATE
10
DATE
11
DATE
Setting the time
After step 7, described in the "Setting the date" section
DELETE/CLEAR
8
TIMER
Set the "hour" using the jog dial.
When you turn the jog dial and let go, the hour will change
up or down by one. When you turn and hold it, the hour will
change continuously.
The clock uses the 24-hour system.
9
Press the ENTER button to set the "hour".
10
Adjust the "minute" using the jog dial.
11
Press the ENTER button to set the "minute".
When the ENTER button is pressed, the clock will show the
correct time.
CLOCK
CLOCK
Checking the date and time
CLOCK
After pressing the TIMER button, turn the jog dial until the date
and time are displayed.
Resetting the date and time
CLOCK
See "Setting the clock".
Once you have set the date and time, "TIME ADJUST" will
not be displayed in step 2. Turn the jog dial to make the date
and time appear.
If you don't need to change the settings, just press the ENTER
button without turning the jog dial again.
E-9
MD-R3H
Advertisement
Table of Contents
