Table of Contents
Advertisement
(Continued)
TIME
1
2
REMAIN
3
TOTAL
REMAIN
PHONES
Switching the time display
(Remote control operation)
Each time the TIME button is pressed whilst in the playback or
pause mode, the display will change as described below.
See the diagram to the left.
1
The elapsed playing time for each track will be displayed.
2
The remaining playing time for the current track will be dis-
played.
3
The total remaining playing time for the disc from the point
being played at that time will be displayed.
Notes:
During random play, only the elapsed playing time for each
1 2 3 4 5 6 7
8 9 10 11 12 13
14
track will be displayed. The display cannot be switched.
15 16 17 18 19 20
Depending on a CD or MD to be played, the playing time
display may not match the playing time which is indicated on
the CD or MD jacket, because the time between the tracks
1 2 3 4 5 6 7
is not included.
8 9 10 11 12 13
14
15 16 17 18 19 20
1 2 3 4 5 6 7
8 9 10 11 12 13
14
15 16 17 18 19 20
Connecting headphones
This unit can be used with commercially available headphones.
Plug them into the PHONES socket on the front of the unit.
About headphones
Be sure that your headphones have a 6.3 mm (1/4") diameter
plug and between 16 ohms and 50 ohms impedance. The rec-
ommended impedance is 32 ohms.
Listening to music through headphones
When headphones are connected to the unit and a MiniDisc is
played, you can hear the recording.
It is not necessary to supply power to any other equipment,
such as a stereo, which is connected to the unit.
To adjust the headphone volume:
Rotate the PHONE LEVEL control towards MAX to increase the
volume, and towards MIN to decrease the volume.
E-17
MD-R3H
Advertisement
Table of Contents
