Hunter 42122 Owner's Manual page 18

Example: If your thermostat is set to turn on at 72
with a span setting of 2, your thermostat will activate your furnace
at 71 and shut it down when it reaches 73
O
a span of 2, your air conditioner will activate at 73
at 71 . This setting can be changed to 1, 2, or 3. 1 will shorten your
O
running time while 3 will lengthen it.
5. SPAN 2: Unless you have a multi-stage conventional or heat pump
system, there is no need to change the second stage span. If you do,
use the
once this has been changed or if you need to make no changes.
Second stage span acts the same as your primary, but it determines
when and how long your second stage heat runs.
6. TEMP F/C: The thermostat can change your temperature reading
between Fahrenheit and Celcius. Use the
between Fahrenheit (F) and Celsius (C) press
flash "Updated" and return to the home screen.
18
or buttons to adjust between 1, 2, or, 3 degrees. Press
44047-01 • 06/18/2012
Menu Options
in heat mode,
O
. For cooling at 72
O
and shut down
O
or buttons to switch
, the screen will
with
O