Windows 2000 - Sharp AR-5516S Start Manual

SETUP

Windows 2000

1
Click the "Start" button, select
"Settings", and then click "Control
Panel".
2
Double-click the "Scanners and Cameras"
icon.
3
Select "SHARP AR-XXXX" and click
the "Properties" button.
4
In the "Properties" screen, click the
"Events" tab.
5
Select "ScanMenu SC1" from the
"Scanner events" pull-down menu.
ScanMenu SC1
U
20
6
Select "Sharp Button Manager U" in
"Send to this application".
ScanMenu SC1
If other applications are shown, deselect the
Note
checkboxes for the other applications and
leave only the Button Manager checkbox
selected.
7
Click the "Apply" button.
8
Repeat Steps 5 through 7 to link
Button Manager to "ScanMenu SC2"
through "ScanMenu SC6".
Select "ScanMenu SC2" from the "Scanner
events" pull-down menu. Select "Sharp Button
Manager U" in "Send to this application" and click
the "Apply" button. Do the same for each
ScanMenu through "ScanMenu SC6".
When the settings have been completed, click the
"OK" button to close the screen.
Button Manager is now linked to the scan menu
(1 through 6).
The scan settings for each of scan menu 1
through 6 can be changed with the setting
window of Button Manager.
For the factory default settings of the scan menu
and the procedures for configuring Button
Manager settings, see "BUTTON MANAGER
SETTINGS" in the Operation Guide.
U