Sharp MD-DR470H Operation Manual page 37

Recording from a Microphone (continued)
MD-DR470H
ENGLISH
To interrupt recording
Press the button.
" To resume recording, press the
" The track number will be increased by one each time
the recording is interrupted.
To stop recording
Press the button.
To write recorded contents on the MiniDisc
Press the button whilst in the stop mode.
Notes:
" Whilst making a mic recording, do not connect any-
thing to the OPTICAL/LINE IN socket on the portable
MD.
" To use a microphone, be sure it is a plug-in-power
type microphone.
- When a plug-in-power type microphone is plugged in,
the portable MD will provide power for the microphone's
operation.
- If a different type of microphone is plugged in, it may not
operate properly or it may cause the unit to malfunction.
" Insert the plug firmly. If you don't, the recording will not
be made properly.
" Use a microphone with a 3.5 mm (1/8") diameter ste-
reo mini plug.
E-37
! Group-up recording
You can shift to group recording whilst recording normally
button again.
from a microphone.
1
Start recording.
2
Press the GROUP button.
Group recording will be activated.
Press the GROUP button.
The track numbers will also be changed.
For group recording, see page 14.
02/12/18
GROUP1
1 2 1 2 3
A B C D E
MDDR470_SEEG_E.fm