Sharp MD-DR470H Operation Manual page 34

! Creating track numbers automatically
When recording from a stereo system, track numbers will
be created automatically at regular intervals.
1
Whilst the recording or recording is paused,
press the MENU button.
The unit enters the menu select mode.
2
Select "MARK" by pressing
the or button and
press the MENU button.
3
Select the desired interval by
pressing the or button
and press the MENU button.
LEVEL-AUTO Track numbers will be created auto-
matically by detecting 1 second or more
of silence.
TIME 10min A new track number is created every 10
minutes.
TIME 5min A new track number is created every 5
minutes.
TIME 3min A new track number is created every 3
minutes.
OFF No track numbers are created automat-
ically.
Note:
When making digital recordings using a CD player or a
MiniDisc player, track numbers will be created automati-
cally regardless of the setting of the auto marker function.
! To create your own track numbers
You can create your own track numbers at any point.
Whilst recording, press the REC button at the point
where you want to create track numbers.
" The track number will be increased by one.
" You can perform the same operation by pressing the
BASS button on the remote control unit.
Numbering restriction
If you number tracks continuously in fixed time, "SORRY"
will be displayed and the operation will be disabled.
In that case, wait until the next operation can be
resumed.
In stereo recording Within 40 seconds
In 2 times long recording Within 80 seconds
In 4 times long recording Within 160 seconds
In monaural recording Within 80 seconds
02/12/18 MDDR470_SEEG_E.fm
MD-DR470H
ENGLISH
E-34