Advanced Recording - Sharp MD-DR470H Operation Manual

Advanced Recording

MD-DR470H
ENGLISH
! Playback sound-actuated recording
Recording automatically starts or pauses by detecting sound
from the stereo system (synchronised recording).
Cancel the setting for trace-back recording.
1
Press the REC button.
Recording is paused.
2
To perform group recording, hold down the
GROUP button for 2 seconds or more so that
"GR" is lit.
When group recording is not performed, hold down the
GROUP button for 2 seconds or more so that "GR" goes
out.
3
Start playback on the external equipment and ad-
just the recording level by pressing the
button (page 17).
4
Press the PAUSE button on the stereo system to
enter the playback pause mode.
Select the starting point for your recording and press the
PAUSE button.
5
Press the MENU button.
The unit enters the menu select mode.
6
Select "REC MODE" by pressing the
button and press the MENU button.
7
Select the recording mode (step 3, page 32) and
press the MENU button.
E-31
8
Press the MENU button.
The unit enters the menu select mode.
9
Select "SYNC REC" by press-
ing the or button and
press the MENU button.
10
Select "ON" by pressing the
or button and press
the MENU button.
" "SYNC" will flash.
" To cancel the operation, press the
11
Begin playback on the stereo system.
Recording will begin automatically.
or
Notes:
" When the stereo system is stopped, the unit will enter
the synchro recording pause mode. When playback is
resumed, the recording will be resumed.
" If a silence lasts for 3 seconds or more, recording will
be paused (pause function does not work for approxi-
mately 10 seconds after the recording starts). When
the unit receives sound again, recording automatically
starts.
" A new track number is created when the recording
or
resumes.
" Synchronised recording cannot be set with trace-
back recording. Cancel trace-back recording (page
35).
02/12/18 MDDR470_SEEG_E.fm
button.