Storage - Honda BF25A Owner's Manual

12. STORAGE
For longer service life of the outboard
motor, have your outboard motor
serviced by an authorized Honda
Marine or Honda Outboard Motor
dealer before storage.
If you are unable to take the motor to
your dealer, proceed as follows:
Draining the Carburetors
Be careful not to spill gasoline. Spilled
gasoline or gasoline vapor may ignite.
If any gasoline is spilled, make sure the
area is dry before storing or transporting
the motor. Do not smoke or allow flames
or sparks where gasoline is drained or
stored.
m Gasoline is
A .
extremely flammable, and
gasoline vapor can explode,
causing serious injury or death.
Do not smoke or allow flames
or sparks in your working area.
KEEP OUT OF REACH OF
CHILDREN.
DRAIN SCREW
1. Disconnect the fuel hose connector.
2. Pull the #3 carburetor drain hose
outside of the motor pan.
3.
Loosen the drain screw of the #3
carburetor and drain the carburetor.
Catch the draining gasoline in an
approved gasoline container.
4. Drain the #l and #2 carburetors in
the same manner using the #3 car-
buretor drain hose.
#l CARBURETOR
DRAIN SCREW
#2 CARBURETOR
DRAIN SCREW
- #3 CARBURETOR
DRAIN SCREW
GRAIN HOSE
5. After thoroughly draining the car-
buretors, tighten the drain screws
securely.
6. Reinstall the drain hose back on the
#3 carburetor.
93