General Control - Sharp CD-MPS660H Operation Manual

General control

CD-MPS660H
ENGLISH
! To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
! Illumination light control
When the power is turned on, light illuminates around the display.
To turn on/off the light, hold down the CLEAR/DIMMER button on
the remote control for 2 seconds or more.
E-11
! Volume control
Main unit operation:
When the VOLUME control is turned
clockwise, the volume will increase.
When it is turned anti-clockwise, the vol-
ume will decrease.
Remote control operation:
Press the VOLUME (+ or -) button to in-
crease or decrease the volume.
! Bass control (X-BASS)
When the power is first turned on, the
unit will enter the extra bass mode which
emphasises the bass frequencies, and
"X-BASS" will appear. To cancel the ex-
tra bass mode, press the X-BASS/DEMO
(X-BASS) button.
! Equaliser
When the EQUALIZER (EQUALIZER MODE) button is pressed, the
current mode setting will be displayed. To change to a different
mode, press the EQUALIZER (EQUALIZER MODE) button repeat-
edly until the desired sound mode appears.
In CD/TUNER/TAPE mode In GAME/VIDEO mode
The sound is not
FLAT
modified.
Bass and treble are
ROCK ROCK
emphasised.
Treble is cut a little.
CLASSIC CLASSIC
Bass and treble are
POPS ACTION
slightly emphasised.
Vocals (midrange
VOCAL SPORTS
tones) are emphasised.
Treble is slightly
JAZZ RACING
emphasised.
03/12/19 CD-MPS660H(H)E2.fm
0 .....
30 MAXIMUM
The sound is not
FLAT
modified.
Bass and treble
are emphasised.
Treble is cut a
little.
Bass is empha-
sised.
Vocals and treble
are emphasised.
Bass and treble are
emphasised more.
TINSZA035AWZZ