Sharp CD-MPS660H Operation Manual page 48

Mini component system
Hide thumbs Also See for CD-MPS660H:
Table of Contents

Advertisement

Troubleshooting chart (continued)
CD-MPS660H
ENGLISH
! Cassette deck
Symptom
" Cannot record.
" Cannot record tracks with
proper sound quality.
" Cannot erase completely.
" Sound skipping.
" Cannot hear treble.
" Sound fluctuation.
" Cannot remove the tape.
! Remote control
Symptom
" The remote control does
not operate.
E-41
Possible cause
" Is the erase-prevention tab re-
moved?
" Is it a normal tape? (You cannot
record on a metal or CrO tape.)
" Is there slack in the tape?
" Is the tape stretched?
" Are the capstans, pinch rollers,
or heads dirty?
" If a power failure occurs during
playback, the heads remain en-
gaged with the tape. Do not open
the compartment with great
force.
Possible cause
" Is the AC power lead of the unit
plugged in?
" Is the battery polarity correct?
" Are the batteries dead?
" Is the distance or angle incor-
rect?
" Does the remote control sensor
receive strong light?
! Tuner
Symptom
" The radio makes unusual
" Is the unit placed near the TV or
noises continuously.
computer?
" Is the FM aerial or AM loop aerial
placed properly? Move the aerial
away from the AC power lead if
it's located nearby.
! Condensation
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, tape heads, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc (or cassette) in the unit until normal
playback is possible (about 1 hour). Wipe off any condensation on
the transmitter with a soft cloth before operating the unit.
03/12/19
CD-MPS660H(H)E4.fm
Possible cause
TINSZA035AWZZ

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents